Thermocouple

thermocouple-anim

  • Type : W, B, R, S, N, K, E, J, T
  • Class of Thermocouple : Class 1 and Class 2
  • Variation material protection tube : (SS316,Hasteloy,Inconel,and so on) Metallic and ( Recrystallized alumina,Mulite,Silimanite, and so on ) Non-Metallic
  • Duplex or single pairs
  • Flange rating : JIS, ANSI, DIN
  • Hazardous area : Flame Proof Head

Approved by KEMA:

  • No. KEMA 03A TEX2002 X, II2G EEx de IIC T6…T1 (for Temperature Sensors)
  • No. KEMA 03A TEX2003, II2G EEx d IIC T6 (for Temperature Transmitters and Terminal Enclosure)
  • To: EN 50014:1997, General requirements
  • EN 50018:2000, Flameproof enclosure “d”
  • EN 50019:2000, Increased safety “e” (for Temperature Sensors)
  • Approved by Research Institute of Industrial Safety, Ministry of Labor, Japan (R.I.I.S):
    Exd IIC T6

RTD

rtd-anim

  • Type : PT100,JPT100,PT50
  • Class of RTD : Class A and Class B
  • 2-wires, 3-wires,or 4-wires
  • Variation material protection tube : (SS316,Hasteloy,Inconel,and so on) Metallic and (Recrystallized alumina,Mulite,Silimanite, and so on) Non-Metallic
  • Hazardous area : Flame Proof Head
  • Flange rating : JIS, ANSI, DIN

Approved by KEMA:

  • No. KEMA 03A TEX2002 X, II2G EEx de IIC T6…T1 (for Temperature Sensors)
  • No. KEMA 03A TEX2003, II2G EEx d IIC T6 (for Temperature Transmitters and Terminal Enclosure)
  • To: EN 50014:1997, General requirements
  • EN 50018:2000, Flameproof enclosure “d”
  • EN 50019:2000, Increased safety “e” (for Temperature Sensors) Approved by Research Institute of
  • Industrial Safety, Ministry of Labor, Japan (R.I.I.S):
  • Exd IIC T6

Thermowell

thermowells-anim

Material’s Variation :

  • Stainless Steel* 304, 321, 316, 347, 310, 446, 253MA, Inconel 600, 601, 625, X-750, Incoloy 800, 825, Hastelloy B, C276, X Others Haynes 25, Carpenter 20Cb, Nichrome, HCF, 50Co-30Cr, Monel, Brass, Bronze, Titanium, Tantalum, Molybdenum *Low carbon types of Austenite S.S. are available on request.
  • Ceramic : Translucent Quart / Transparent Quart (QT), Silimanite (PT2), Mullite (T1), Recrystallized Alumina (PT0), LT1, 2040, ZR 1706, etc.

Test and Inspection :

  • Pressure Test
    N2 gass pressure test up to 10MPa is conducted upon request.
  • Hydrostatic Pressure Test
    Internal pressure test up to 40MPa is conducted upon request.
  • X-Ray Inspection
    X-ray inspection to insure uniform wall thickness or complete finish is also performed upon request.

Flange rating : JIS (RF & FF), ANSI (RF & RTJ), DIN

Extention Wires

wires-anim

Material’s Variation :

  • Stainless Steel* 304, 321, 316, 347, 310, 446, 253MA, Inconel 600, 601, 625, X-750, Incoloy 800, 825, Hastelloy B, C276, X Others Haynes 25, Carpenter 20Cb, Nichrome, HCF, 50Co-30Cr, Monel, Brass, Bronze, Titanium, Tantalum, Molybdenum *Low carbon types of Austenite S.S. are available on request.
  • Ceramic : Translucent Quart / Transparent Quart (QT), Silimanite (PT2), Mullite (T1), Recrystallized Alumina (PT0), LT1, 2040, ZR 1706, etc.

Test and Inspection :

  • Pressure Test
    N2 gass pressure test up to 10MPa is conducted upon request.
  • Hydrostatic Pressure Test
    Internal pressure test up to 40MPa is conducted upon request.
  • X-Ray Inspection
    X-ray inspection to insure uniform wall thickness or complete finish is also performed upon request.

Flange rating : JIS (RF & FF), ANSI (RF & RTJ), DIN